Braces

BORT Sport Knee Support provides compression and helps stabilize and relieve the knee. It has soft fabric with a smooth surface for elasticity and comfort. There's a spiral stay on each side for support, and it comes in plus sizes for a good fit. The knee's hollow area has a soft, flexible region for ease of movement. The support has a black and green color scheme. For sports, the support includes a silicone bonding zone on the thigh. It also has Coolmax fabric to keep moisture away for dryness and comfort. It's designed to fit well during sports. It's made of latex-free material. And, the pad shape guides the patella during intense movements. It also has a modern, sporty look with reflective details.

BORT Sport Patella Band is designed to relieve your knee pain. It's perfect for active people, especially those into sports. It's made of soft, stretchy material and comes in black/green colour. You can comfortably wear it during contact sports. You can adjust the pressure on the pad as needed. It helps with joint coordination and reduces pain. Plus, it looks modern and sporty.

Capri Contour LSO has two parts that work separately to give precise pressure above and below. This helps you feel more comfortable and supported while also reducing pain. A flat panel at the front of the belt makes it more comfortable to wear and more accessible to follow instructions. It comes in one size that fits most people, making finding the right fit and managing stock simple. The belt can fit around waist sizes from 25 inches to 45 inches. You can remove the stiff panel at the back, which supports your lower spine from the first lumbar vertebra to just below the fifth lumbar vertebra.

3-Piece Prosthetic Suspension Sleeve is made of Neoprene in three parts for use with below-knee prostheses. The middle part is lined with nylon for durability, while the top and bottom sections are made of Sharkskin Neoprene for better grip. It's available in beige color.

Replacement pad set is available for the Aspen CTO, fitting all adult sizes from Short to X-Tall. These pads are designed to cushion the area between the neck collar and the skin. They are hypoallergenic, moisture-wicking, non-toxic, and latex-free with cotton-lined breathable foam. They help prevent skin breakdown and allergic reactions. To extend the life of your neck support, pads should be changed or cleaned daily.

The 6-Piece Prosthetic Suspension Sleeve is a neoprene sleeve designed for below-knee prostheses. It has six pieces and is durable, with a nylon lining in the center for extra strength. The top and bottom parts use Sharkskin Neoprene for a better grip. It's available in grey.

Aspen CTO is a neck brace that restricts neck and upper back movement. It's comfortable for patients to wear. Studies show it limits movement more than neck collars do. This makes it a versatile option for treating neck and upper back issues in healthcare.

Neo-Flex Active Suspension Sleeve is a reliable and affordable prosthetic suspension sleeve. Made from tough Neoprene material that's free of latex, it comes with a knee pad for extra comfort and durability. Its flexible design and Nylon knee center offer added softness and flexibility for better comfort and movement. If necessary, you can adjust its length by trimming at the top and bottom. The Neo-Flex Active is offered in a Gray/Black color combination.

The Aspen Classic Collar Back Panel is explicitly designed for the Aspen Classic Cervical Collar and is meant for use on the back.

Multistop Polycentric ROM Knee Hinge is made to support the sides of your knee, keep your kneecap stable, and offer some warmth and pressure. They have aluminum hinges that move like your knee does, and they're designed to stop it from bending too far backwards.

Bort Scar Rupture Bandage's fabric is stretchy, gentle on the skin, and lets air through. It comes with two supportive splints. The silicone pad is strengthened with plastic and has adhesive for easy repositioning.

One Stop Polycentric Knee Hinges come with adjustable hinges, which can be bought separately. These braces are good for various knee problems, such as instability, meniscus injuries, ligament injuries, and osteoarthritis. By adjusting the hinge, you can limit the knee's movement, which helps lessen wear and tear on the joint.

FAST-WRAP Thoracolumbar Support helps stabilize and compress your back and abdomen. You can adjust the level of support with the lower straps. It has padded shoulder straps that you can change to fit you better. The steel stays in the back add more support. This device is useful for back strains, arthritis, mild osteoporosis, and improving posture.

Ultraflex ONE Companion Joint comes with a companion joint that stops moving at 20 and 80 degrees. There's also an option for a companion joint with a t-stirrup.

Edge TLSO Low Profile with SPX Sternal Pad is a sturdy spine support system made to give strong stability and support. It limits unnecessary movement and gives pressure to help the spinal discs. It's great for older patients or others prone to skin issues but needing strong support. The front part is 9 inches tall, and the back is 14.5 inches tall.

Ultraflex UltraQuick Release allows you to switch or connect orthopedic devices easily. It works with any joint that meets the specifications. By attaching a section to your daytime support, you can also add a night-time stretching treatment option. Each package includes one release mechanism on one side.

Trulife T34 Hyperextension Orthosis features a specially designed pad for comfort and to prevent pressure sores. It also has a swivelling sternal pad to reduce pressure. Using the latch-lock clamp makes it easy to put on and take off. Plus, it can be adjusted for height and width.

Aspen Vista TLSO supports the middle and lower back, giving patients the right amount of movement control while they heal. It's a flexible system that fits different body types comfortably. With three shoulder strap options and adjustable height, it's easy to find a good fit. Plus, it's adjustable to various sizes and can be used with other Vista Lower Spine supports.

Aspen Sierra 688 TLSO is different from the Sierra 464 because it has a classic front closure with drawstrings for better tightening and easier use. It's designed to fit a wide range of patients, from 24 to 50 inches, thanks to its universal size design with large slots on the sides of the back panel and slide-through side panels. Adjusting the height is made simpler with a new clip and slide system on the chest panel. Straps can be positioned over the shoulder or under the arm to restrict thoracic spine motion effectively. It's an affordable option with good motion restriction and immediate fitting with just one size. Plus, it offers superior comfort to traditional Jewett-style braces, even for larger patients.

Ultraflex ADR Knee Joint is simple and easy for patients who can think well and move their hands quickly. It works similarly to the KO USS but without the cable and lever. This mechanism can be used to make custom orthopedic supports that help with walking problems, weak muscles, and unstable joints, improving movement. These supports are final and not meant for stretching. They are sold separately, so you need to specify if you want one for the left or right side and whether it's for the inner or outer part of the body.

Aspen Classic TLSO offers good motion restriction, comfort, and helps patients. It includes four sizes for lower back support and three upgrade kits for upper back support.

Ultraflex 2 Stainless Steel Knee Joint is handy for making custom braces for rehabilitating bone and muscle injuries and for treating muscle stiffness in neurological conditions. These braces help with therapy and aren't meant for walking. You can buy them for either the left or right side. They have a range of motion from 0 to 135 degrees, including hyperextension from -15 to 135 degrees. You can adjust them in increments of 7.5 degrees and lock them in place at any angle. You can also add power assists, which come in three strengths: 45, 60, and 90 lbs. Each side of the joint weighs about 4.2 oz (119 g) without the bars. Materials used include stainless steel for the joints, and aluminum for the sidebars. The sidebars can be removed, and there's a non-corrosive coating to protect against rust.

Bending Iron is made from chrome vanadium steel with rounded edges. They are essential for shaping steel, stays, and hinges when fitting back supports and knee braces.

This is an Aluminum 4 Hole Connector Pyramid that stays in place and can be attached to any socket or knee with a 4-hole pattern. You'll need four flat head screws to attach it. The pyramid comes with a 2-year warranty and weighs 64g. It can hold up to 275lbs/125kg.