Products tagged with 'knee joint'

Ultraflex 2 Stainless Steel Knee Joint is handy for making custom braces for rehabilitating bone and muscle injuries and for treating muscle stiffness in neurological conditions. These braces help with therapy and aren't meant for walking. You can buy them for either the left or right side. They have a range of motion from 0 to 135 degrees, including hyperextension from -15 to 135 degrees. You can adjust them in increments of 7.5 degrees and lock them in place at any angle. You can also add power assists, which come in three strengths: 45, 60, and 90 lbs. Each side of the joint weighs about 4.2 oz (119 g) without the bars. Materials used include stainless steel for the joints, and aluminum for the sidebars. The sidebars can be removed, and there's a non-corrosive coating to protect against rust.

Ultraflex 3 Aircraft Aluminum Knee/Elbow Joint is used for making custom knee braces in orthopedic and neurological treatments. It helps with stretching at low loads. These braces are for therapy, not walking. They come in pairs: a power unit and a companion. They can move in both directions, with a total adjustable range of ±140º or 280º. Safety and therapy settings lock in every 20º. It can be locked at any position within 280º. The power joint has integrated dynamic power assistance (extension/flexion) with a strength of 7.5 Nm (66 in·lb) from an 85D power unit. The weight with full struts is 165g (6 oz.) for Knee/Elbow and 75g (2.5 oz.) for Ankle/Wrist.

Ultraflex ADR Knee Joint is simple and easy for patients who can think well and move their hands quickly. It works similarly to the KO USS but without the cable and lever. This mechanism can be used to make custom orthopedic supports that help with walking problems, weak muscles, and unstable joints, improving movement. These supports are final and not meant for stretching. They are sold separately, so you need to specify if you want one for the left or right side and whether it's for the inner or outer part of the body.

Ultraflex ADR Pediatric Knee Joint is useful for making personalized orthoses to address walking problems, weak muscles and joints, and instability, which improves movement. Orthoses with this joint are final and not meant for stretching. The sit-to-stand slide lock/safety release at the joint is easy to use and doesn't require much effort for patients with good understanding and hand skills. It works similarly to the KO USS but without a cable and lever.

Ultraflex Elbow/Knee Range of Motion Dial Joint is useful for making custom supports for ankles, knees, wrists, and elbows to help with neurological spasticity and orthopedic recovery. These supports are meant for therapy, not for walking. Materials: Joint: Made of aluminum bars (5052-H34), with stainless steel nuts and screws for locking. Finish: Aluminum coated with epoxy powder. Range: Can move from -0 to 160 degrees. SectorLock: Any part of the range can be locked for restricted movement.

Ultraflex One Joint offers advanced technology support to your rehabilitation needs. It provides protection, stability, and assistance for joints like ankles, knees, wrists, and elbows. These orthoses aid in treating neurological spasticity and orthopedic issues. Each package includes one joint, and additional joints can be bought separately. You can also purchase the alignment jig for the ONE joint separately.

Ultraflex UltraQuick Release allows you to switch or connect orthopedic devices easily. It works with any joint that meets the specifications. By attaching a section to your daytime support, you can also add a night-time stretching treatment option. Each package includes one release mechanism on one side.