Anatech Inc

EAR 1 Matric Resin helps in optimizing the molecular weight reduces viscosity and surface tension, improving the wetting of fiberglass and carbon materials. It works well with low-density materials due to its low viscosity. Makes it ideal for carbon and fiberglass. It is non-hazardous and includes a paste promoter.

Carbon Braid is made with a 12K strand count to enhance its compatibility with polyester and fiber. This design reduces fraying, leading to less dust. It comes in widths of 3 to 10 inches and lengths of 10 or 50 feet.

Powder-Free Nitrile Gloves are latex-free and protein-free. They are non-sterile and designed to be used with either hand. These gloves are disposable and come in boxes of 100.

Dispensing gun is designed to dispense dental adhesive, silicones, and dental impression material for accurate bite registration. Made of high-quality plastic, it features a release lever and plunger that work together to load and remove cartridges . The gun is compatible with any 1:1 50ml size cartridge and has a design for easy use.

Carbon fiber sheets are used to make custom immobilization devices like masks and casts for patients undergoing radiation therapy. These devices help patients stay in the right position during treatment. Ensures that radiation targets the correct area and reduces harm to healthy tissues. Carbon woven tapes are available in a 5.7oz per sq. yd. 45-45 weave pattern, offering high strength and stiffness for their weight.

Fiberglass casting tape is a medical tape used to make casts for broken bones. It's made of resin-coated fibrous cloth that hardens when it comes into contact with air or water. It's strong and stiff for its weight and has a lightweight 45-45 weave pattern.

CSP's material is lighter than carbon fiber and doesn't release flying fibers when ground down. It also doesn't cause discomfort or itchiness on the skin, which is common with carbon fiber. It bonds better with resin and allows resin to soak through the fiber braid more . This means the braid uses less resin per volume, resulting in a lighter socket. Additionally, it's more cost-effective than carbon fiber and offers excellent fatigue strength. The material has been tested in socket form under ISO guidelines for patients weighing up to 300 lbs.

ST&G Ultra 6 Carbon Braid is used to make implants for surgeries like spinal and orthopedic procedures. Its durability and strength make it suitable for these implants, handling the body's weight and pressure well. It provides smooth and lightweight lamination that maintains strength. It also works well with resin and is cost-effective compared to regular carbon materials.

Suprinara construction has standard lateral support and a deep heel cup. It comes with a full-length orthotic that has a multiform top cover. The multiform topcover doesn't transfer heat, making it easy for clinicians to mold it to a child’s foot by hand. While it works well as-is, you can customize it further using a heat gun on the orthotic's underside.

Novaped Full Length Rigid Insoles are designed with a thin and rigid schein sandwich construction for support. It comes finished and can be worn as-is. If needed, it can also be remolded to fit your patient's foot shape.

Novaped Carbon Edition Wide is a wide version introduced by Schein. It features an ultra-thin insole made with carbon fibre. This carbon layer gives the insole its stiffness while keeping it thin. The top layer adds extra support and can be trimmed to fit. The available sizes range from 36 to 43.

Novaped Orthotic with Heel Cup offers comfort and support while correcting foot positions. It features a high heel cup and a flat heel. Makes it suitable for direct use or custom molding at 100°C. The 2mm orange top cover adds cushioning for extra comfort. Available in sizes 30 to 44.

Cambrelle Flat Orthotics is designed to save time and reduce material waste in the lab. It offers a quality finish for your orthotics. To use, heat it in an oven or with a heat gun and then vacuum form. The orthotic provides semi-rigid support from the rear to the midfoot and offers flexibility in the forefoot. It's lined on both sides with durable cambrelle material. You can add postings, make modifications, or add an additional topcover. It's suitable for dress shoes, ice skates, and ski boots. When heating, set the temperature to 375°F and heat for about 3 minutes before vacuum forming.

Suprinara Children’s Foot Orthotics provides good side support. It has a standard heel cup. The orthotic is 3/4 length with a multiform topcover. The topcover doesn't transfer heat, making it easy for the clinician to shape it to fit a child's foot by hand. While it works well as-is, it can also be customized using a heat gun on the bottom of the orthotic.

Novaped Full Length Multiform Insole has designed a new thin insole with a durable multiform top cover for comfort. It features a heel cup to keep the foot in place, a firm arch for support, and a lateral flare to secure the foot on the insole. You can customize the insole to fit your patient's foot by molding it to their cast, saving time on cutting, gluing, and finishing. Available in sizes 36-43.

Novatherm Full Length is crafted for wider feet. Offers comfort and support without sacrificing quality. The insole provides enhanced cushioning and support, reducing foot fatigue during extended wear. It's made of durable, breathable materials to ensure longevity and foot health. It is designed for patients with wider feet and improves walking and standing comfort.

Diabetic Insole is designed to help diabetic patients with foot sores. The insoles have a bottom layer with hexagonal pieces that can be peeled off. Removing the piece under the sore reduces pressure on that spot. The inserts are flat and thin enough to fit any shoe. They can also be cut to match the shape of the patient's shoe. Available sizes range from 35 to 45, matching European shoe sizes.

EZ Cast Cutter Knife is designed for safety, reducing workplace injuries. It features a recessed blade to prevent cuts. It's ideal for cutting through C-FORM AFO Casts.

Tubigrip Tubular Bandages fit to the body and is easy to use with gypsum bandages. It helps reduce the risk of thrombosis before, during, and after surgery. You can buy it in 10-metre packs, available in four different widths.

Slipper Sock is a new casting product designed for making foot orthotics. It offers a quick and clean way to create foot molds using its fast-setting resin. You can get a high-quality mold in under 2 minutes without dealing with plaster. Plus, you can use it over nylon hosiery. Each box contains 10 pairs of Slipper Socks.

Biaxal Fiberglass Sleeve is woven and often used in aerospace and quality products. It meets the MIL-C-9084C, Type III standard. The 50ft rolls are convenient to handle and store. They're produced from the braiding mills. They guaranteed to weigh the correct amount. Plus, these rolls are free from splices.

Supination/Pronation Wedges are designed to reduce pressure and stress on muscles, tendons, and joints. They feature a raised part that is ¼” tall for either lateral or medial unloading. To prevent supination, place the heel wedges with the thickest edge on the outside edge of your shoes. Each pack contains 10 pairs of heel wedges.

Novatherm Heel Wedge can be adjusted without using adhesive products. The Pronation/Supination Wedge can be placed on either the inner or outer side of the heel or forefoot for quick adjustments. The Heel Wedge offers a fast way to lift the heel or make adjustments.

Pronation/Supination Wedge can be adjusted for individual needs without using adhesive. The Pronation/Supination Wedge can be placed on the inside or outside of the heel or forefoot for easy adjustments. The Heel Wedge offers a quick way to lift or adjust the heel.