Braces

Dynamic Knee Stabilizer is designed to give you the best support. It has four stays for extra stability. The fabric is breathable and elastic, with a cotton lining for comfort and a perfect fit.

Graphite Lite LSO is solution for stabilizing the lower spine and relieving pain. With its low-profile back panel and mesh fabric, it seems designed for both support and comfort. The use of graphite in the back panel to contour to the spine's shape for direct compression is intriguing, especially since it's a clinically-proven method for stabilization.

Abdominal Binder is a medical device typically made of elastic material, designed to provide support and compression to the abdomen. The elastic and foam combination in a 10" high binder offers effective support while also ensuring comfort. The presence of darts in the elastic panel prevents rolling, ensuring that the binder stays in place during use. They help reduce pain, provide stability, and promote faster healing by minimizing strain on the abdominal muscles.

Infrapatellar Strap helps ease pain by adding tension to the infrapatellar tendon. It stabilizes the kneecap by tightening the patellar tendon. Made of Neoprene, it has a rubber tube to focus corrective force and is simple to put on and adjust using Velcro.

Thumb Support is solution for those dealing with thumb joint pain or injuries. Its design with a pre-formed moldable stay and soft padded neoprene material seems well thought out for both comfort and functionality. Being able to easily apply it and adjust the support level with the wrist strap while still retaining some flexibility for everyday tasks is a great feature. It sounds like a product that could provide much-needed relief and aid in the healing process for users with thumb-related issues.

Ultraflex 3 Stainless Steel Ankle/Wrist ROM Joint is useful for creating custom wrist supports in orthopedic and neurological rehabilitation. It helps with low-load stretching. It can move in both directions, with an adjustable range of ±140º or a total of 280º. It has safety and therapeutic locks in 20º steps. You can lock it in any position within 280º. The power assists, helping with movement, are rated up to 10.2 Nm (90 in·lb) for the 85D power units. The weight with full struts is 290g (6 oz.) for knee/elbow and 250g (2.5 oz.) for ankle/wrist. The joint heads are made of ASTM A240/A240M Type AISI 410 (Martensitic stainless) and are heat-treated to HRC 38-42 (electropolished). The struts are also A240/A240M Type AISI 410 (Martensitic stainless) and are heat-treated to HRC 38-42 (electropolished). The dimensions are 3.175mm(18”) x 12.7mm(1/2”) x 254mm(10”).

Double Stay Wrist Stabilizer is a customizable wrist support product designed to provide stability, promote proper healing, and offer comfort to individuals with weak or unstable wrists. The inclusion of removable and moldable aluminum stays, an adjustable thumb hole, and material options like Neoprene and Coolprene contribute to the overall functionality and user-friendly nature of the stabilizer.

Dynamic Plus LSO offers enhanced support and versatility. The extended contoured back panel targeting the lumbar spine provides added stability, and its removable feature allows users to switch to a more low-profile design when necessary. The extendable plastic side panels offer customizable lateral support, which can be adjusted by unclicking the oval attachments for additional reinforcement. The incorporation of mesh material ensures cool and lightweight comfort, a valuable feature for prolonged wear. Additionally, the removable pulley system facilitates easy cleaning, maintaining hygiene and longevity. With a back height of 14.5 inches and a front height of 7 inches, it seems well-designed to cater to various body types and support needs.

Multistop Knee Hinge are made to support the knee from the sides. It stabilize the kneecap, and offer warmth and compression. They have aluminum hinges that move like your knee does, along with straps for added support. Used in Ortho Active knee braces.

Ridgeflex Ankle Joint is made by ST&G with a special material called Prepalon. Prepalon is created using Continuous Fiber Elastomer Technology (CFET), which gives a good balance of stiffness and flexibility. This technology allows for smooth movement of tendons, proper support in different directions, and control over rotation. The continuous fiber mixed with elastomer keeps the joint from stretching, removing the need for extra materials like strings and stronger elastomers to prevent tearing.

Bort Selladur Stabilizer Sleeve is a black sleeve designed to provide added comfort when wearing the Bort Selladur . It serves as a cushioning layer underneath the stabilizer, enhancing the overall wearing experience. The sizing is universal, suitable for wrist circumferences ranging from 13 to 21 cm, ensuring a snug fit for a variety of users.

Sportec Compression Knee Support is designed to stabilize the muscle tissue of a strained knee joint. Using medical compression of 20-30mmHg.

Step-On 100 Medial AFO is a special shoe insert made from plastic. It helps people walk better by supporting their ankle movement. It's good for people with ankle problems that can't be fixed and have a bone sticking out on the side of their ankle.

Active Patella Guide is designed to be discreet, featuring a side pad to help your kneecap stay in place. It uses Velcro straps to apply steady pressure on the pad. The foam pad, which can be adjusted or removed, grips your kneecap to keep it stable and in line with your thigh bone. The sleeve is short and can be used on either leg to pull it inward or outward. It's made of 3mm Neoprene.

Elastic wrist compression braces, provides support and stability to the wrist while allowing for a range of motion. The soft, beige plush elastic material offers a comfortable fit, while the Velcro closure ensures a secure and adjustable fit. The segmentation not only enhances breathability but also facilitates moisture evaporation, keeping the wrist dry and comfortable during extended wear. These braces are ideal for minor sprains or strains, providing the necessary compression to promote healing and reduce discomfort.

Industrial Back Support with Clip-On Suspenders is just like the Lumbosacral Back Support but with suspenders that clip on. It helps you remember how to lift properly. It's designed to fit easily into your daily routine, reminding you to lift correctly so your spine stays straight and your posture stays good. It's a great tool to have for better ergonomics at work.

ST&G makes Ridgeflex Ankle Joint, which uses a unique material called Prepalon. This material uses Continuous Fiber Elastomer Technology (CFET), which balances stiffness and flexibility well. CFET allows for a tendon design that enables smooth movement, proper support, and control over rotation. By blending continuous fiber into the elastomer, the joint stays rigid without stretching, eliminating the need for additional materials like string. The flexible elastomer increases tear strength, while the blended fiber adds support.

Airflex Active Thumb Lacer is like a great product for providing support and stability to the thumb during various activities. Its use of Airflex material ensures breathability and comfort, making it suitable for situations where heat and perspiration might otherwise be problematic. The inclusion of a pre-formed, moldable aluminum stay adds to its effectiveness in immobilizing the thumb and stabilizing the CMC and MCP joints.

Bort Asymmetric Knee Support brace offers stability with lateral stays on each side. It stays in place with a silicone adhesive border. The knee center has a special fabric that relaxes and protects tendons and tissues. A stretchy zone on the side of the silicone pad improves flexibility. It also keeps the knee cool and odor-free with moisture-wicking and antimicrobial features. Plus, it's comfy with soft edges. Black braces are available.

Dream Joint helps your clients walk more naturally. It comes with features like resistance for bending toes down, help for lifting toes, a smooth design that's not bulky, a unique clutch that works in one direction only, adjustable strength, easy to make, light, and made of strong stainless steel.

The replacement pads for Pavis hernia supports are shaped to fit your body and hold a hernia in place. They're made of firm foam with a soft velour cover. Just choose left or right.

Aspen Evergreen Lumbar brace from Aspen Medical Products offers a simple way to help with lower back pain. It's slim and easy to wear under clothes, designed to treat different issues in the lower back.

Patellar Tracking Brace keeps your knee steady and stops it from shifting. It has a strong grip liner that holds the knee cap firmly and applies good pressure. Plus, it has stabilizers on the sides to keep your knee from rolling. You can adjust it easily to fit your leg and control how tight it feels. It works well for pulling your knee either to the inside or outside, no matter which leg you need it for.

Pavis Thumb Brace is like a well-designed solution for thumb immobilization. The incorporation of the Pavis Rizofix system, along with adjustable Velcro closures, seems like it would provide excellent support while allowing for comfortable wear. The ability to open the dorsal thumb area for scar inspections or bandage care is a thoughtful feature, as it prioritizes the user's comfort and convenience. Plus, the use of soft cotton velour against the skin ensures comfort and breathability, which is crucial for prolonged wear.